- Info
- Specs
- Videos
- Fitment
- How To Use
The Pryme Ultimate Wheel Pack will suit your sanding and cleaning needs from big to small, and will save you some cash compared to buying them separately!
What Does It Do?
- Fine cleaning wheels clean and shine metals and leaves behind a brushed type finish
- Coarse cleaning wheels blend in scratches and scrapes, sand away casting texture and markings, and also work great for removal of rust, corrosion, and paint
- Flap wheels also blend in scratches and scrapes and sand away casting texture and markings with consistency
- All wheels are great for paint preparation too
- Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too
How Does It Work?
These wheels can transform your parts in a variety of ways. Whether you're looking to remove scratches or give your parts a general cleanup, these are the wheels that will get the job done. You must have a bench grinder / buffing machine and die grinder in order to utilize these wheels.
The flap wheels are offered in 80 grit, 180 grit, and 320 grit.
- Use 80 grit for blending in deep scratches and removal of casting texture on steel and stainless steel.
- Use 180 grit for blending in deep scratches and removal of casting texture on aluminum and soft metals. Works well for light scratches on steels.
- Use 320 grit as a finishing wheel.
Includes
- 6" Large Fine Cleaning Wheel
- 6" Large Coarse Cleaning Wheel
- 2" Fine Mini Cleaning Wheel
- 1.5" Fine Mini Cleaning Wheel
- 1" Fine Mini Cleaning Wheel
- 2" Coarse Mini Cleaning Wheel
- 1.5" Coarse Mini Cleaning Wheel
- 1" Coarse Mini Cleaning Wheel
-
6" Flap Wheel in either 80, 180, or 320 Grit
-
2" Flap Wheel in either 80, 180, or 320 Grit
- 1" Flap Wheel in either 80, 180, or 320 Grit
The 6" wheels are designed to be mounted on a bench grinder / buffing machine and can be used on 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes. The 2", 1.5", and 1" wheels are to be used a die grinder or high speed drill.
Related Items:
The Wheel Flange Set keep the wheels securely in place on your buffer
Purchase the wheels separately here
Click on "Video" tab to see the wheels in use.
Buffer or die grinder not included
Always wear a dust mask or respirator and proper eye protection while buffing!
Cleaning Wheel Specs
- Fine wheels are comparable to 400 grit, coarse wheels are comparable to 180 grit
- Wheels are 3/8" thick
- Max RPM: 25,000 for mini wheels, 3600 for large wheels
- Adapter for mini wheels uses a 1/4" shaft size
Flap Wheel Specs
- All wheels are 1" wide
- Max RPM: 3600 RPM for 6" wheels, 25,000 RPM for 2" and 1" wheels
- 2" and 1" wheels use a 1/4" shaft size
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, Fiber, Buff, Buffing, Scotch Brite Wheel, Scotch Brite Pad, Abrasive Wheel, Abrasive Pad, Buffing Wheel, Buffing Pad
The 6" wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Recommendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
The die grinder wheels are designed to be used on a die grinder that uses a 1/4" shaft size, or could be used on a high speed drill as well. The best results will come with them on a die grinder.
Recommended Die Grinders
Ingersoll Rand Grinder Click Here
Neiko Grinder Click Here
High Speed Drill Click Here
Electric die grinder Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
Buffing
- Use the coarse and lower grit wheels for scratch removal and aggressive sanding, use the fine and higher grit wheels for a smooth, brushed type finish
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- Applying a lubricant such as WD40 or Maxima MPPL to the part during sanding will help acheive a smoother finish.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- The sweet spot to buff on the wheel is between 4 and 5 o’clock. Look at your buffing machine from the left side, and picture where 4 and 5 o’clock are on the wheels. That is where you will want the part to touch the wheel when buffing.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
was able to use the smaller wheel on my drill real quick for a second on my cases just to see what it would look like, 10/10 results i have no complaints on quality and how well they work!
Bummed that I went so long using lesser quality products. When it comes to bike projects this Pryme is the only way to go!
Excellent product and great service. It always feels better spending hard earned money with good people!!! Thank you Cam and the Pryme team.
Couldn’t ask for better customer service. Just started my build and could live without these things
These wheels are amazing not sure how I lived without them before. Awesome company as well will be ordering more wheels from them now on
