- Info
- Specs
- Video
- Fitment
- How To Use
Take your buffing game to a new level with a Pryme Cleaning Wheel Pack! These wheels effectively transform your part in just a few passes.
What Does It Do?
- Fine wheel cleans and shines metals and leaves behind a brushed type finish
- Coarse wheel blends in scratches and scrapes, sands away casting texture and markings, and also works great for removal of rust, corrosion, and paint
- Works well for paint preparation
- Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too
How Does It Work?
Available in 4", 6", and 8" wheel diameter. These wheels mount on a bench grinder or buffing machine, but the 4" wheels can be used on a drill as well. Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes.
The larger the wheel, the longer it will last. Smaller wheels work better in tighter areas however and also cost a bit less. Wheels can be stacked on machine for a wider buffing path.
Includes
Related Items
The Wheel Flange Set keep the wheel securely in place.
Space the wheel away from the machine with a Wheel Spacer.
Click on "Video" tab to see the wheels in use
Buffer not included
Always wear a dust mask or respirator and proper eye protection while buffing!
Specs
- Fine wheel is comparable to 400 grit
- Coarse wheel is comparable to 180 grit
- 3/8" thick
- Max RPM: 3600
- Proudly made in the USA
These wheels are made from a nylon strand material that is embedded with resin and an aluminum oxide abrasive for optimal stiffness and abrasion.
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Buff, Buffing, Scotch Brite Wheel, Scotch Brite Pad, Abrasive Wheel, Abrasive Pad, Buffing Wheel, Buffing Pad
These wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Recommendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
Installation
- Secure wheel to buffer shaft with a flange on either side.
- Tighten down the nut until the wheel is secure on the shaft and doesn’t spin (use a spacer if your nut bottoms out on the threads).
Buffing
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- The sweet spot to buff on the wheel is between 4 and 5 o’clock. Look at your buffing machine from the left side, and picture where 4 and 5 o’clock are on the wheels. That is where you will want the part to touch the wheel when buffing.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
Great product
Unbelievable results
Amazing results with these products! Hope to see more videos on your youtube channel with more details
I got frame guards for my 2004 kx125 and they were super easy to Install and hold up great! The wheel cleaning kit work’s wonders on bikes I’m restoring, and cleans off any rust grooving or any other marking extremely easy! I would recommend these products for anyone who works on dirt bikes or rides them and wants to keep there frame in nice shape.
So happy I found these guys and their awesome solutions. These wheels I use I. The race shop on the daily ! Cam is the best !🤘🏻@603mods
