- Info
- Specs
- Videos
- Fitment
- How To Use
Take your buffing game to a new level with a Pryme Ultimate Cleaning Wheel Pack! These wheels effectively transform your part in just a few passes. This pack will suit your cleaning needs from big to small, and will save you some cash compared to buying them separately.
What Does It Do?
- Fine wheels clean and shine metals and leaves behind a brushed type finish
- Coarse wheels blend in scratches and scrapes, sand away casting texture and markings, and also works great for removal of rust, corrosion, and paint
- Works well for paint preparation
- Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too
How Does It Work?
The larger wheels mount on a bench grinder / buffing machine and can be used on 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes. The mini wheels are available for either a die grinder or dremel tool.
Includes
- 6" Large Fine Cleaning Wheel
- 6" Large Coarse Cleaning Wheel
- 2" Fine Mini Cleaning Wheel
- 1.5" Fine Mini Cleaning Wheel
- 1" Fine Mini Cleaning Wheel
- 2" Coarse Mini Cleaning Wheel
- 1.5" Coarse Mini Cleaning Wheel
- 1" Coarse Mini Cleaning Wheel
- Wheel Adapter (for either dremel or die grinder)
Related Items
The Wheel Flange Set keep the wheels securely in place
Purchase the wheels separately here
Click on "Video" tab to see the wheels in use
Buffer or dremel tool not included
Always wear a dust mask or respirator and proper eye protection while buffing!
Specs
- Fine wheel is comparable to 400 grit
- Coarse wheel is comparable to 180 grit
- Wheels are 3/8" thick
- Max RPM: 25,000 for mini wheels, 3600 for large wheels
- Proudly made in the USA
These wheels are made from a nylon strand material that is embedded with resin and an aluminum oxide abrasive for optimal stiffness and abrasion.
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Drum, Dremel Attachment, Buff, Buffing, Die Grinder Attachment, Kit, Mini, Pack, Bench Grinder, Buffer
The large wheels are designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Recommendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
The Dremel kit is designed to be used on a Dremel or rotary tool that uses a 1/8" shaft size.
Dremel Tool Recommendations
Dremel Brand Tool Click Here
Avid Rotary Tool Click Here
Wen Rotary Tool Click Here
The die grinder kit is designed to be used on a die grinder that uses a 1/4" shaft size, or could be used on a high speed drill as well. The best results will come with them on a die grinder.
Recommended Die Grinders
Ingersoll Rand Grinder Click Here
Neiko Grinder Click Here
High Speed Drill Click Here
Electric die grinder Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
Buffing
- Use the rough for scratch removal and aggressive sanding, use the fine wheels for a smooth, brushed type finish
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- The sweet spot to buff on the wheel is between 4 and 5 o’clock. Look at your buffing machine from the left side, and picture where 4 and 5 o’clock are on the wheels. That is where you will want the part to touch the wheel when buffing.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
I found this product on YouTube and wanted it right away. Once I owned it I found myself using it to clean up any metal that needed a little love. It’s a great product.
The wheels work really good and make your parts look brand new
Super stoked on you polishing products. Made quick work on cleaning up all the stainless and aluminum pieces on my build. Game changer.
Thanks for a great product and service.
John
Awesome bundle, made it super easy to clean up my 02 cr250 pipe
This is my first bike build and I can’t say enough about these wheels and the inspiration Cam has had on this project. It was a great personalized experience just on this first order. Will be ordering again
