- Info
- Specs
- Videos
- Fitment
- How To Use
What Does It Do?
- Blends in scratches and scrapes
- Sands away casting texture and markings
- Also great for paint preparation
- Best for aluminum, but can be used on steel, stainless steel, magnesium, and brass with great results too
How Does It Work?
When mounted on a bench grinder or die grinder, these wheels effectively sand away metal. Whether you're looking to remove scratches or the texture on a cast part, these are the wheels that will get the job done. These wheels have fiber pad in between flaps of sandpaper for smooth and effective action.
Offered in 80 grit, 180 grit, and 320 grit.
- Use 80 grit for blending in deep scratches and removal of casting texture on steel and stainless steel.
- Use 180 grit for blending in deep scratches and removal of casting texture on aluminum and soft metals. Works well for light scratches on steels.
- Use 320 grit as a finishing wheel.
Includes
- 6" Flap Wheel (mounts on bench grinder)
- 2" Flap Wheel (mounts on die grinder)
- 1" Flap Wheel (mounts on die grinder)
Related Items
Click here to purchase the wheels separately.
The Wheel Flange Set keep the wheels securely in place on the buffing machine.
Space the wheels away from the machine with a Wheel Spacer.
Click on "Video" tab to see the wheels in use
Grinder tools not included
Always wear a dust mask or respirator and proper eye protection while buffing!
Specs
6" Wheel Specs:
- Mounts on a bench grinder / buffing machine
- 1" wide
- Max RPM: 3600
- Available for 1/2" (12.7mm), 5/8" (16mm), and 3/4" (19mm) buffer shaft sizes
Small Wheel Specs:
- 1" wide with a 1/4" shaft (best used with a die grinder, can be used on a high speed drill too)
- Max RPM: 25,000
Tags: Cleaning, Pad, Wheel, Scuff, Scotch, Abrasive, Sanding, Flap, Drum, Fiber, Buff, Buffing, Scotch Brite Wheel, Scotch Brite Pad, Abrasive Wheel, Abrasive Pad, Buffing Wheel, Buffing Pad
The 6" wheel is designed to be used on a buffing machine or bench grinder. They can be used on a machine with a 1/2", 5/8", or 3/4" shaft. For a buffing machine, you'll want at least a 1/2 HP motor that spins at 3000 RPM. One with an extended shaft is best, so you have lots of clearance to buff your parts. If you'll be doing lots of buffing, opt for a 3/4 HP motor.
Machine Recommendations:
2 Speed 3/4 HP Baldor Buffer (will last a lifetime)
If you have a machine but need the big washers that hold the wheels in place Click Here
To space the wheels away from the machine for more clearance Click Here
To extend the shaft on your buffer Click Here
The smaller wheels are designed to be used on a air die grinder that uses a 1/4" shaft size, or could be used on a high speed drill as well. The best results will come with them on a die grinder.
Recommended Tools
Ingersoll Rand Grinder Click Here
Neiko Grinder Click Here
High Speed Drill Click Here
Electric die grinder Click Here
Whenever you're doing any sort of grinding or sanding you'll want to use eye and respiratory protection. Trust us, you do not want to be breathing in metal particles! At the bare minimum, wear a dust mask and glasses.
A great product for protecting yourself is this respirator Click Here
Alternatively, this is also a great respirator to pair up with safety glasses Click Here
Use these filters with the previously mentioned respirators Click Here
Installation
6 Inch Wheel
- Install wheel onto buffer shaft with the sandpaper facing the direction the wheel will be spinning.
- Tighten down the nut until the wheel is secure on the shaft and doesn’t spin (use a spacer if your nut bottoms out on the threads).
Smaller Wheels
- Slide the shaft of the wheel at least 3/4" into tool and tighten lock nut.
Buffing
- Remove as much grease, oil, and dirt as you can before using the wheels, so you’re not contaminating them.
- Sand or buff in the same direction if you’re going for a brushed look. Intersecting scratches do not look good.
- Try to buff evenly across the part so you don't end up with dips or low spots.
- Use light pressure with the wheel or you'll wear it out prematurely. If you need to apply heavy pressure, you should go to a more aggressive wheel. Refer to buffing chart below.
- Applying a lubricant such as WD40 or Maxima MPPL to the part during sanding will help acheive a smoother finish.
- In order to make the wheels last as long as possible, stay away from sharp edges. The direction of the wheel should be spinning away from an edge and not towards it. Adjust the orientation of the part accordingly.
- The sweet spot to buff on the wheel is between 4 and 5 o’clock. Look at your buffing machine from the left side, and picture where 4 and 5 o’clock are on the wheels. That is where you will want the part to touch the wheel when buffing.
- Refer to the buffing chart below for the proper wheels to use with each metal type, as well as the steps to achieve the desired finish.
- If you have problems achieving a good finish, refer to the troubleshooting guide below.
- Always wear a dust mask or respirator and eye protection while buffing!
After Buffing:
- A clear ceramic coating will protect your part after buffing.
- Steel and magnesium parts must be protected with a coating, bare steel will rust quickly and magnesium corrodes in a matter of hours. Stainless steel and aluminum can be left bare without corrosion issues, as long as you keep the parts clean and out of the weather during storage.
- To achieve a consistent brushed look on larger parts, finish it by hand with a hand pad, going in the same direction you were buffing in.
Tracking Information Tracking numbers will be uploaded to the order page and sent to your email inbox. It may take up to 24 hours for the tracking page to show the most recent information.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
We are not to be held responsible for stolen or lost packages, packages sent to the wrong address, or refunding/replacing packages in these scenarios. It is the customer's responsibility to file all shipping claims.
Returns We accept returns within 14 days after your item has been delivered. If 14 days have gone by since your item was delivered, unfortunately we cannot offer you a refund. To initiate a return please send us an email at sales@prymemx.com. To be eligible for a return, your item must be in the same condition that you received it. The item must be unused / unworn and original tags attached. No returns allowed on sale/clearance items.
Returned Packages Please double check your order before checking out. Is your shipping address correct? Are the items in your cart correct (buffer shaft size, year, model, etc)? Any packages returned to us because of an incorrect address or item will incur a $10 fee.
Refunds Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Your refund will be processed and a credit will automatically be applied to your credit card or original method of payment, within 7 days.
Late or Missing Refunds If you haven’t received a refund for your return yet, first check your bank account. Then contact your credit card company, it may take some time before your refund is officially posted. If you’ve done all of this and you still have not received your refund yet, please contact us at sales@prymemx.com.
Shipping Costs You will be responsible for paying the return shipping costs of your item. Additionally, the original shipping costs will not be refunded.
Exchanges If you need to exchange an item, please see our refund policy above and include exchange instructions with the return. We do not offer exchanges on out of stock items. If the item is out of stock then we will refund you instead. The buyer is responsible for all shipping costs on exchanges.
Incorrect or Defected Item If we made a mistake with your order, please contact us at sales@prymemx.com. We will provide a return label if an exchange needs to be made. You must notify us within 14 days of delivery of any defects with the item. Any claims past 14 days will be considered wear and tear, and cannot be replaced.
Customer Reviews
Works great. Start on a "trash" piece to see how much pressure to apply
Great product removes casting marks quickly and smoothly! Definitely getting more once these wear out.
Thanks for the great feedback on the wheels Jeff! Happy to see they made a difference on your project. Your support of Pryme is greatly appreciated.
Great quality. Will definitely buy again!
Thanks for your review Brian! Happy to hear the wheel is working well for you.
These wheels work great for removing casting marks on triple clamps, linkage lower fork tubes also speed up the process on heavily worn and rough parts
Thanks for your feedback on the products Chad! Happy to hear the wheels have been making a difference for you. Your business is much appreciated!
Flap wheel and buffing wheels are making parts on my bike look better then new...also got the buffer you recommended and works great! also got the Torque wrench you recommended...you know what your talking about and not just selling products for a buck...!
I appreciate your feedback on the products Dean! It's great to hear they're working well along with the recommendations. Your business is greatly valued.
